J3k2

File: /MZ/A/J03/D/I//MZ/A/J03/D/K/0002.HTM
Processed on 3-13-2021
The home for this page is J3

Labeling/Designation

Description/Count
description (summary) 2006-8-12 vVE At the western edge of k2 starts the old trench in B6, excavated by a German team from Tuebingen University. The trench runs from West to East but has a different orientation than the J3 grid. As the trench progresses East it also runs more to the North. The baulk walls have in some places caved in slightly, but are generally in reasonable condition. It now has approximately the following dimensions: 260 x 880 cm. [Input File: Q812vE2.j]
2006-9-19 ei W-half of German Trench(BA) and expected location of second apron. [Input File: Q918eI4.j]
best view 2020-7-27 jW [Input File: ZE727jW.j]

Recovery/Assignment
daily notes 2006-8-13 vVE We cleaned the South section of the German trench B6 by cutting it back approximately 5 cm. The deposit that was removed in this proces was defined as f512. Then we proceeded to excavate the Northwestern corner of k2 (f514 and f513) and just to the west of German trench B6 (f515 and f516). These areas were excavated in order to overlay the orientation of our grid on the B6 trench. However, because our surveyor, bP could not yet survey the markers for k2 that are missing (ie. the Eastern markers and those markers that define the baulks) we proceeded very cautiously. [Input File: Q813vE.j]
2006-8-12 vVE Today a picture, v501, was taken of this area and of the state of preservation of the German trench in B6. Then a lot of backfill was excavated, the sherds collected and counted: three base sherds, 5 rims and 53 body sherds had been found. Not all dirt could be removed but this will be completed tomorrow morning. [Input File: Q812vE2.j]
2006-8-14 vVE Feature f513 and f516 were excavated to the level of the German trench B6 and these features were then closed. f518 is the top soil of the part of k2 that lies South of trench B6. f518 was removed today. [Input File: Q814vE.j]
2006-8-17 vVE We continued to excavate the deposit that lie south of f532 and cover it. By accident this area was assigned f535 today, but f535 was the deposit to the north of f532. Therefore the q-lot q526 was reassigned to f557. We further uncovered the very large boulder f543 and relayed it. [Input File: Q817vE.j]
2006-8-15 vVE We started to excavate the natural accumulation f522 in the southern half of k2. We closed it after excavating several (big) pick runs in this feature. f533 is the natural accumulation that lies under f522 and is a continuation of this feature. f533 was not excavated today. Features f524 and f531 were assigned to stones that had fallen down northwards (perhaps recently) from the second apron f532. [Input File: Q815vE.j]
2006-8-19 vVE We excavated f557 to further expose f532. Several lines of stones have now been uncovered but the expected steps are not present. Instead of the steps, a slightly sloping surface of boulders became visible. The downward slope of these stones is also not nearly as steep as we expected. At the bottom of f557 we found a natural compacted floor surface f566. [Input File: Q819vE1.j]
2006-8-16 vVE Excavation continued in f533 where we reached the elevation of the top of the stones of the second apron. A new feature will be assigned to these deposits tomorrow. f535 was started in the northern part: both the bottom of the German trench B6 in BA and the bottom of f513. [Input File: Q816vE.j]
2006-8-22 vVE A small remainder of f535 (bottom of the german trench BA) was excavated. The correct marker points defining the borders of k2 had not been known for a long time and therefore this small area of f535 remained in the NE corner of k1. [Input File: Q822vE.j]

Volumetric Localization
space definition 2006-9-19 ei m3620 [Input File: Q918eI4.j]
length of two sides 2006-9-19 ei N500 [Input File: Q918eI4.j]
2006-9-19 ei E500 [Input File: Q918eI4.j]

Analogical Record
view/drawing of locus
p500
2007-3-21 / jW / [Input File:R321jW3.j]
p505
2007-8-13 / eI / [Input File:R813eI.j]
p508
2007-8-13 / eI / [Input File:R813eI.j]
p509
2007-8-13 / eI / [Input File:R813eI.j]
p502
2007-8-13 / eI / [Input File:R813eI.j]

w504
2007-8-20 / eI / [Input File:R820eI.j]

w505
2007-8-20 / eI / [Input File:R820eI.j]

w508
2007-8-20 / eI / [Input File:R820eI.j]

w509
2007-8-20 / eI / [Input File:R820eI.j]

v504
2007-11-01 / jW / [Input File:Ry01jW.j]

v504a
2007-11-01 / jW / [Input File:Ry01jW.j]

v504b
2007-11-01 / jW / [Input File:Ry01jW.j]

v501
2007-11-01 / jW / [Input File:Ry01jW.j]

v104
2006-9-03 / mO / [Input File:Rx31jW.j]

v104b
2006-9-03 / mO / [Input File:Rx31jW.j]

v104c
2006-9-03 / mO / [Input File:Rx31jW.j]

v162
2007-7-07 / jW / [Input File:Rx31jW.j]

v162a
2007-7-07 / jW / [Input File:Rx31jW.j]

v162c
2007-7-07 / jW / [Input File:Rx31jW.j]

v158b
2007-7-07 / jW / [Input File:Rx31jW.j]

v159
2007-7-07 / jW / [Input File:Rx31jW.j]

v159a
2007-7-07 / jW / [Input File:Rx31jW.j]

v161
2007-7-07 / jW / [Input File:Rx31jW.j]

v158
2007-7-07 / jW / [Input File:Rx31jW.j]

v504c
2007-11-01 / jW / [Input File:Ry01jW.j]

v504d
2007-11-01 / jW / [Input File:Ry01jW.j]

v504e
2007-11-01 / jW / [Input File:Ry01jW.j]

v504f
2007-11-01 / jW / [Input File:Ry01jW.j]

v511
2006-8-17 / vE / [Input File:Ry01jW.j]

v511b
2006-8-17 / vE / [Input File:Ry01jW.j]

v511c
2006-8-17 / vE / [Input File:Ry01jW.j]

v511d
2006-8-17 / vE / [Input File:Ry01jW.j]

v511e
2006-8-17 / vE / [Input File:Ry01jW.j]

v511f
2006-8-17 / vE / [Input File:Ry01jW.j]

v514
2006-8-19 / vE / [Input File:Ry01jW.j]

v506
2007-11-01 / jW / [Input File:Ry01jW.j]

v508
2006-8-17 / vE / [Input File:Ry01jW.j]

v526b
2006-8-23 / vE / [Input File:Ry01jW.j]

v526c
2006-8-23 / vE / [Input File:Ry01jW.j]

v519
2006-8-21 / vE / [Input File:Ry01jW.j]

v525
2006-8-23 / vE / [Input File:Ry01jW.j]

v526
2006-8-23 / vE / [Input File:Ry01jW.j]

v535
2006-8-24 / vE / [Input File:Ry01jW.j]

v535a
2006-8-24 / vE / [Input File:Ry01jW.j]

v535b
2006-8-24 / vE / [Input File:Ry01jW.j]

v535c
2006-8-24 / vE / [Input File:Ry01jW.j]

v535d
2006-8-24 / vE / [Input File:Ry01jW.j]

v535e
2006-8-24 / vE / [Input File:Ry01jW.j]

v537
2006-8-24 / vVE / [Input File:Ry01jW.j]

v539
2006-8-24 / vVE / [Input File:Ry01jW.j]

v540a
2006-8-24 / vVE / [Input File:Ry01jW.j]

v541
2006-8-27 / vVE / [Input File:Ry01jW.j]

v541b
2006-8-27 / vVE / [Input File:Ry01jW.j]

v542
2006-8-27 / vVE / [Input File:Ry01jW.j]

v542a
2006-8-27 / vVE / [Input File:Ry01jW.j]

v545
2006-8-27 / vVE / [Input File:Ry01jW.j]

v545c
2006-8-27 / vVE / [Input File:Ry01jW.j]

v545d
2006-8-27 / vVE / [Input File:Ry01jW.j]

v550
2006-8-31 / vVE / [Input File:Ry01jW.j]

v550a
2006-8-31 / vVE / [Input File:Ry01jW.j]

v550d
2006-8-31 / vVE / [Input File:Ry01jW.j]

v553c
2006-9-02 / vVE / [Input File:Ry01jW.j]

v553d
2006-9-02 / vVE / [Input File:Ry01jW.j]

v553e
2006-9-02 / vVE / [Input File:Ry01jW.j]
v556
2006-9-04 / mO / [Input File:Ry01jW.j]

v553
2006-9-02 / vVE / [Input File:Ry01jW.j]

v553a
2006-9-02 / vVE / [Input File:Ry01jW.j]