.bk J03
.fl R818sg.j
.fd Descriptions of items in Deir ez Zor museum
.rd R815
.ri sG
.ed R818
.ei sG

i 20.1
ds Large, thick circular frit pendant, horizontal suspension loop at top with vertical ridges. Raised rim around edge of pendant. Projecting central boss from which eight straight rays radiate, tapering slightly toward rim. Rays alternate with eight smaller raised bosses around the edge of pendant. Surface opaque, some spots of iridescence and some traces of blue and aqua color remaining. Very worn, especially rays, some fine cracks at edge, edges chipped in several areas.
ht 4.2
w1 4.05

i 20.2
ds Cylindrical frit bead, pierced lengthwise, tapering strongly toward ends, both ends slightly chipped around hole. Pattern of alternating black and white lines forming a loose zigzag design. Black lines greatly faded, surface mottled with brown and black spots.

i 20.3
ds Cylindrical frit bead, pierced lengthwise, tapering slightly toward ends, both ends slightly chipped around hole. Pattern of alternating pearly gray and white lines forming a loose zigzag design. Surface strongly mottled with brown and black spots, bead broken in half crosswise approximately 1/3 down length and repaired with glue.

i 21
ds Cylindrical frit bead, pierced lengthwise, tapering slightly toward ends, one end chipped. Pale blue, some areas of white, surface lightly speckled with brown spots.

i 26
ds Cylindrical frit bead, pierced lengthwise, tapering toward ends, both ends slightly chipped and flake separating from one end. Pattern of alternating white and pale yellow stripes at ends, coming together in center of bead to form a loose zigzag design. Small area of dark brown speckling on surface. 

q 379.1
ds Large cylindrical frit bead, pierced lengthwise, tapering slightly toward ends, in good condition. Pattern of alternating black and white stripes at ends, coming together in center of bead to form a zigzag design. Colors opaque, surface slightly abraded. 

q 383.6
wm reddish clay, fired, unglazed
ds Large clay object in shape of truncated cone, flaring out into circular ridged surface at one end. This surface bears a central raised point surrounded by four concentric raised rings which increase evenly in size toward remaining outer edge. Much chipping and abrasion at outer edge of ridged surface, slightly less than half of surface broken away obliquely. Pale to medium brownish-gray encrustation over large areas of surface. 

q 403.2
ds Long cylindrical bone object tapering to a point at one end, the other end broken off at the point at which a hole was pierced crosswise through the shaft; lower half of hole remaining. Color mottled yellowish brown, surface smooth. Perhaps originally part of a pin or large needle.

q 577.1
ds Animal figurine in fine yellowish clay (CH ware), probably the head, neck and shoulders of a ram. Summarily executed without defined features, horns curving tightly forward and up over muzzle, muzzle ending in a small hole. Chipped on one side of head, broken off at sides of shoulders. Body ends in a smooth curve below shoulders, hollow interior visible and connected with hole in muzzle. Perhaps originally a spout for a vessel.