3. Volumetry

Back to top: 3. Volumetry

11.3.1: Concepts

It is customary to speak of squares and loci as “arbitrary.” This refers to the fact that they are constructs imposed by the excavator and not original data found in the ground. But the term “arbitrary” may also imply unjustified whim. For this reason, I prefer to describe such constructs as volumetric referents [missing link, ZGy27 mDP] – “volumetric” because they deal with the measurement of volumes, and “referents” because, inasmuch as they apply values to the data in the ground, they insert them in a broader and explicit referential web.

Topography (also: “positioning”) is the best known part of this process.

Back to top: 3. Volumetry

11.3.2: Sections and profiles

Sections [missing link, ZGy27 mDP] represent one of the most important operative concepts in archaeology. They are in effect one and the same with loci, since they represent the vertical cut that corresponds to one of their faces. (I use the term “profile” to refer to the graphic rendering of the physical cut.) Accordingly, profiles are found in the analytical (in the right-hand side) part under any given locus.

Typically, for each locus we draw the profile of the northern and the eastern section. These will be found both as photographs and as drawings under the pertinent locus.
     Where sections are linked across several loci, they are given as part of a combined drawing that joins together the component profiles. Where necessary, a special locus is created that subsumes the pertinent individual loci.

Back to top: 3. Volumetry

11.3.3: Loci and squares

Loci and squares are described in the grammar under the heading of complex referents [missing link, ZGy27 mDP].

A locus is a volumetric unit with minimal horizontal axis of undefined size, and with unlimited vertical axis. Loci are generally used for smaller test soundings, or, conversely, to subsume, two or more squares.

A square is a locus with a preset size of 5 m on the side. Squares are integrated within a preset geometrical grid, so that the corresponding labels follow a predetermined sequence.

Back to top: 3. Volumetry

11.3.4: Plots and floor plans

Floor plans are generated from plots that reproduce a schematic outline of elements found in the ground and represented according to their coordinates.

Back to top: 3. Volumetry

11.3.5: Geo-referentiality

Since the beginning of the project, all measurements taken in the field, whether by the surveyor or by the excavators, have been geo-referenced, in two distinct ways:

1. At the beginning, we could not obtain a specific UTM set of coordinates for the site. So our grid, established by Stephen M. Hughey, gave the coordinates of 500E and 500N to the geodesic point found at the top of the tell.
2. It also assigned to it the value of 500.00 meters as absolute elevation, based on general elevation measurements found on commercially available maps.

Back to top: 3. Volumetry

11.3.6: Techniques of measurement

From a theodolite used at the start of the project in 1984 we moved on to a total station in the early nineties. These instruments give the higher degree of precision and are used only by the surveyor to lay (“markers” [missing link, ZGy27 mDP] and “benchmarks.”) These are used either as points that define referents (especially loci) and elements (occasional architectural features or location of special items), or as control points from which other points (“relays” [missing link, ZGy27 mDP]) are measured by the excavators.

Because of the quantity of measurements taken, and the cost that would be entailed in having total stations available in each excavation units, relays are still taken with a simple device, which we call “triangulation rod,” and which is described in detail in the website section on techniques.

Other advanced techniques, in particular photo-modelling and a laser scanner, have been used on an experimental basis by Prof. Maurizio Forte. A separate report will be forthcoming in the website [missing link, ZGy27 mDP].

Back to top: 3. Volumetry

11.3.7: The different uses of the grid

There are two distinct conceptions of the grid, although the distinction is not generally appreciated:

1. In the first place, the grid is a referential concept – a network of ideal lines that crisscross a site and allow to easily correlate any given location in space to a location on a scaled plane or even on a three-dimensional space, whether on paper or on a computer screen.
2. In a second instance, the grid is conceived as a physical entity that is overlaid on the site itself, by means of stakes and strings.

At Tell Mozan, we do not use the physical grid. And while we have a conceptual, or referential, grid, we do not in effect use that either – at least not as a grid. We only use points of two different degrees of precision, markers and relays [missing link, ZGy27 mDP]. So it may be said that we use a grid of points rather than a grid of lines.

An important consequences that flows from this is that we have used a number of different physical grids, with different orientation depending on the special conditions of the terrain and of the excavation strategy.

Back to top: 3. Volumetry

11.3.8: 3D volumetry

The development of a proper three-dimensional volumetry that is effectively integrated in the archaeological process is an altogether new theoretical construct and technical endeavor. It is the subject of the Frankfurt doctoral dissertation of Federico A. Buccellati (later published as UMS 6), who uses the Urkesh Palace of Tupkish as the test case for his applications. It is expected that this will become a new chapter in the Grammar of the Archaeological Record.