Urkesh Ceramic Analysis
Categorization / Lexicon / Wares / 3rd-2nd mill.

Dark Brick Red Ware (DBR)

Marilyn Kelly-Buccellati – September 2011
Laerke Recht – May 2016

Back to top: Dark Brick Red Ware (DBR)

General Description

Dark Brick Red Ware is relatively rare within the corpus. It is characterized by its dark red exterior color. The sherds are tempered with both chaff and mineral temper.

Dark Brick Red Ware is part of the Imitation and Imported Wares Group.

Note: This ware was also abbreviated as DB or BR which may still be found in some places. It also appears to be related to the Dark Burnished Red Ware (DBR), which was very rare and is not described separately.

Back to top: Dark Brick Red Ware (DBR)

Characteristics

Back to top: Dark Brick Red Ware (DBR)

Phase 5 - UrIII/Isin-Larsa

Basis for Definition

Never numerous, present in Phase 5 features especially A14 Phase 5 features, especially a pit (see f81,95,98,110,112,113). There are some indications that this ware began at the end of Phase 4. Ware is more common in the Khabur and Mittani periods.

Identifying Attributes

Thick dark red slip on exterior of jars and bowls and partly over rims of bowls.

Clay Type Heavy clay containing iron oxide.
Temper

Fine and thick chaff temper, calcite on surface and some in section, small amounts of sand and mineral temper. Medium jar shapes have more chaff temper.

Firing

Low to medium fire; thicker examples and some thinner walled examples have a carbon core.

Color

Exterior surface usually dark red but can vary to red-brown and brown.

Surface Treatment

Wet smoothed, some examples are coarser with few examples burnished.

Comments

A deep bowl with convex base, A15.304 from feature 523 is a good example of this ware with a thick slip covering the exterior. The feature dates to the end of Phase 4 indicating that the ware probably began in use at the end of this phase.

Back to top: Dark Brick Red Ware (DBR)

Phase 6 - Khabur

Temper

The chaff temper is both sub-round and linear; Some examples have relatively large amount of lithic temper including calcite and quartz.

Firing

higher fired than previously but continues to have a carbon core.

Surface Treatment

Strong wheel marks near and on the base. The slip is thick in the Khabur period examples but does not adhere well to the clay body; this is especially the case where there is much lithic temper on the surface. When there is much chaff temper on the surface the thick slip has a better adherence. Few examples are burnished.

Back to top: Dark Brick Red Ware (DBR)

Phase 7 - Mittani

Temper

Vessels have less chaff and more fine and medium lithics.

Color

Slip tends to be lighter red-brown.

Surface Treatment

Slip adheres better to the surface because chaff and lithic temper is less.

Back to top: Dark Brick Red Ware (DBR)