1. OVERVIEW
| Roster | Date | Author | Record |
|---|---|---|---|
| Category | !! | !! | other |
| Best definition | 2008-09-10 | !! | tool [Input: S926JW1.j] |
| Sub-definition (type, family) | 2008-08-28 | eE | pi [Input: S828SNP1.j] |
2. IDENTIFICATION
Labeling
| Roster | Date | Author | Record |
|---|---|---|---|
| Reference to q-lot | !! | !! | q279 (pottery) |
Designation
| Roster | Date | Author | Record |
|---|---|---|---|
| Definition | 2008-09-10 | sC | tool [Input: S926JW1.j] |
| Description (summary) | 2008-08-28 | eE | A fully preserved copper alloy pin with an indented rounded head. In its current condition the majority of the piece is oxidated and encrusted with dirt. Approximately 2 cm from the point of the pin, there is a small smooth patch of surface that reveals what may been a polished piece. The head shape is slightly flattened and swelled around the point of the indentation, suggesting the head was shaped by hammering with a small blunt chisel. [Input: S828SNP1.j] |
| 2008-09-10 | sC | Copper-alloy needle (in the Mz. Typoloy corresponds to needle type 1); circular-sectioned shaft tapering, straight and thick; complete; oval eyelet, made through perforation of the shaft. The whole object surface is oxidated and encrusted with soil [Input: S926JW1.j] |
3. STRATIGRAPHY
Contact Association
| Roster | Date | Author | Record |
|---|---|---|---|
| Type of contact: contemporary events/movable items | 2008-08-27 | !! | q279.1 (tool) sits in f180 (accumulation D) [Input: S827DL.j] |
Time Sequencing
| Roster | Date | Author | Record |
|---|---|---|---|
| Stratum (to which element belongs) | 2012-10-16 | !! | s130J5B [Input: WX16JW.j] |
| Phase (to which element belongs) | 2012-10-16 | !! | h7sJ5B [Input: WX16JW.j] |
4. TYPOLOGY
Measurements
| Roster | Date | Author | Record |
|---|---|---|---|
| Height | 2008-08-28 | eE | 11.9 [Input: S828SNP1.j] |
| Length | 2008-09-10 | sC | 12.3 [Input: S926JW1.j] |
| Width 2 or diameter of body | 2008-08-28 | eE | 0.43 [Input: S828SNP1.j] |
| 2008-09-10 | sC | 0.55 [Input: S926JW1.j] | |
| Notes on measurement | 2008-08-28 | eE | w2 is taken from the approximate center of the piece. Because the piece is slightly bent, the height, rather than the assumed lenght, has been recorded. [Input: S828SNP1.j] |
Items Field Record
| Roster | Date | Author | Record |
|---|---|---|---|
| Field definition | 2008-08-27 | sNP | tool [Input: S828DL1.j] |
| Field height | 2008-08-27 | sNP | 12.6 [Input: S828DL1.j] |
| Field length | 2008-08-27 | sNP | 0.4 [Input: S828DL1.j] |
| Field width 2 | 2008-08-27 | sNP | 0.4 [Input: S828DL1.j] |
| Field ware or material | 2008-08-27 | sNP | bronze [Input: S828DL1.j] |
| Field shape | 2008-08-27 | sNP | complete [Input: S828DL1.j] |
| Field color | 2008-08-27 | sNP | metal green [Input: S828DL1.j] |
| Notes on field record | 2008-08-27 | sNP | bronze pin [Input: S828DL1.j] |
Morphology
| Roster | Date | Author | Record |
|---|---|---|---|
| Ware or Material, species | 2008-08-28 | eE | bz [Input: S828SNP1.j] |
| 2008-09-10 | sC | prob. copper [Input: S926JW1.j] | |
| Color | 2008-08-28 | eE | green [Input: S828SNP1.j] |
| Condition | 2008-08-28 | eE | complete [Input: S828SNP1.j] |
| Notes on typology | 2008-09-10 | sC | 0.55cm is head diameter while 0.4cm is shaft diameter [Input: S926JW1.j] |
6. REFERENCE
Disposition
| Roster | Date | Author | Record |
|---|---|---|---|
| Sequential transmittal number to Museum | 2008-09-18 | jW | 12-S918 [Input: S918JW1.j] |